Solar Inverters and Rapid Shutdown

A solar inverter turns the direct current (DC) power from your panels into the alternating current (AC) that your home, farm, or business uses. The three common setups are a string inverter on its own, a string inverter with a power optimizer at each panel, and microinverters. The right choice depends on your site, including whether the array sits on a roof or on the ground.

We install all three setups across Central or Eastern PA and recommend the one that fits your property.

What an inverter does

Solar panels produce DC electricity. Your lights, appliances, and the utility grid use AC. The inverter makes that conversion and also follows utility rules, including shutting off during a grid outage unless a battery and backup equipment are part of the system. See Battery Storage Systems for how backup works.

Three common inverter setups

String inverters

Panels are wired together in series into one or more strings, and a string inverter converts that DC power to AC. Today's string inverters can track the best operating point of each input separately, and many handle several inputs at once. The inverter usually mounts on a wall, on a rack near the meter, or at the array itself. Rooftop string systems add one safety device at the panels, covered in Rapid shutdown below.

String inverters with power optimizers

A small power optimizer mounts at each panel. It lets that panel operate at its own best output and then sends DC power to a string inverter. It also supports panel-level monitoring.

Microinverters

A small inverter mounts at each panel, or sometimes at a pair of panels, and converts that panel's output to AC right at the roof or array. There is no string inverter. Each panel works independently, and panel-level monitoring is built in.

Rapid shutdown

Rooftop systems need a way to quickly de-energize the wiring on the roof for firefighter safety. That is called rapid shutdown. Microinverters and power optimizers handle it as part of the device at each panel. A plain string inverter on a roof is paired with a rapid shutdown device at the panels, used only for safety, not for optimizing or monitoring.

Ground-mounted systems and dual-axis trackers generally do not need rapid shutdown, which is one reason they often use a plain string inverter.

See Roof-Mounted Solar Panels for more on rooftop systems.

How they compare

Shade and mismatch. On a plain string, panels share a current, so a shaded or soiled panel can pull down the others on that string, the way one slow car can back up a single-lane road. Bypass diodes and separate inputs reduce this, but they do not eliminate it. Optimizers and microinverters let each panel go at its own pace, so a chimney, vent, or branch affects mainly that panel. For more on why shade matters, see Solar Panel Performance. On an open, evenly lit ground mount or tracker, the difference is usually small.

Panel-level monitoring. Optimizers and microinverters show how each panel is doing. A plain string inverter typically reports the string or the system as a whole, which is enough on a uniform array and less helpful when you need to find a single underperforming panel.

If a device fails. A string inverter is one piece of equipment. If it stops, the panels tied to it stop producing until it is replaced. That swap is usually done at ground level or on a wall, more like replacing a single appliance than taking a trip onto the roof. With microinverters, a failed unit takes only its panel, or pair of panels, offline, but the repair is on the roof or at the array. Optimizers sit in the middle: the string inverter can still take the system offline, and a failed optimizer is a roof visit for that panel. We service and repair all of these setups, including systems we did not install. See Solar Panel Service and Repair.

Adding panels later. Microinverters are usually the easiest way to add a few panels at a time, within your service and utility limits. Optimizers are also flexible on mixed roof planes, though later equipment generally needs to be compatible with what you already have. A plain string system can be expanded, but new panels have to fit the string design and the inverter's capacity, or they may need their own inverter. Any expansion goes through the same permitting and utility process as a new system.

Efficiency and clipping. Large string inverters often have a slight edge in peak conversion efficiency. In real use, shade, layout, and how the system is sized matter more. All three setups can clip when the panels produce more DC power than the inverter can convert to AC. On a string or optimizer system, that limit is the string inverter. On microinverters, each unit has its own limit. See Solar Cost: Price per Watt vs. Price per kWh for more on clipping and why it is not always a problem.

Batteries. Your panels and a battery both work in DC, while your home runs on AC. A hybrid inverter can handle the panels and the battery together, which is a common DC-coupled path for string inverters and for many optimizer systems. A battery can also connect on the AC side with its own inverter, which works with any of the three setups, including microinverters and existing systems. See Battery Storage Systems.

Cost. A plain string inverter is usually the least expensive of the three. Adding an optimizer at each panel costs more. Microinverters often cost the most. The right choice still depends on the site, not only on equipment cost.

Which setup we recommend

On an open, unshaded ground mount or tracker, a plain string inverter is often the straightforward choice, since high-voltage DC runs efficiently over a long underground trench.

On a large, plain, unshaded barn or commercial roof, we use a string inverter with either rapid shutdown devices or optimizers, whichever fits the system at the lower cost.

On a roof with mixed planes, dormers, chimneys, or nearby trees, optimizers or microinverters are usually the better fit. They also make sense when you want to see each panel in the monitoring app.

If you want a battery now or later, we factor that in, because some paths use a hybrid inverter and others pair a battery on the AC side.

There is no single best inverter for every property in Central or Eastern PA. We will walk the site with you and recommend the setup that fits.

Frequently asked questions

What is the difference between a power optimizer and a microinverter?

Both sit at the panel and let that panel work on its own. An optimizer adjusts the panel's DC output and still sends DC to a string inverter. A microinverter converts the panel's power to AC at the array, so there is no string inverter.

Can a string inverter handle panels that face more than one direction?

Yes, if each roof face connects to its own input on the inverter, and the panels on each face are a good match for each other. If those faces also have shade from dormers, chimneys, or trees, optimizers or microinverters are usually the better fit.

Does solar on a barn or shop need rapid shutdown?

Yes. Arrays on barn, poultry house, shop, and other farm building roofs get rapid shutdown, the same as any other building.

Can I add a battery later, no matter which inverter I have?

In most cases, yes. A hybrid inverter can often accept a battery directly. Microinverter systems and many existing string systems can add a battery on the AC side. We will look at your equipment and recommend the simplest path. See Battery Storage Systems.

Tell us about your property and have a recent electric bill handy, and we will recommend an inverter setup as part of your proposal. Request a free quote.

phone-icon2

Have Questions? Call us at 877-345-2470

We want to ensure you are well-informed about our product line and how it can save you money on your monthly energy bills.